truewhite truewhite For Two People

Reg Price: $198.00

Deals Price: $14.00, 93% Off

Details
Designed for use by two for maximum teeth whitening without hours in the dental chair and costly, painful treatments.
– Size: 6.0 oz.
– Color: Blue
– See an instant shade change, lighter after only one treatment!
– Same enamel-safe ingredients used by dentists
– Pain-free and sensitivity-free.
– Good for 20-25 dental quality treatments
– For directions, see “Additional Info”
– Made in USA

Additional Info

More Information
Directions: Caution: Once the tray is heated it becomes extremely flexible. When placing it into your mouth, be careful not to allow the edges of the upper rim of the “U” shaped tray to touch together.
Molding your Mouth Trays
1. Fill a pot with at least 4″ of water, so that the entire tray will be submerged when placed straight down into the water. Bring the water to a boil.
2. Once the water is boiling, remove the pot from the stove. When the boiling stops completely, grasp the very top of the tray tab and put the tray down into the water for 6 SECONDS. Do not submerge the tab in the water and be sure to keep your fingers out of the water at all times. Time 6 seconds CAREFULLY! (The tray has to be warm enough to mold, but not so pliable that it loses it”s shape. Someone else timing you will make it more accurate and easier for you.
3. Do NOT WAVE THE TRAY back and forth while it is submerged in water. The tab is designed for lifting only! It will not support the tray once it is pulled out of the boiling water, in a horizontal position. Lift the tray straight out of the water so that the hot water runs off and out of the tray. Support the back of the tray with the fingers and/or thumb. Be careful to keep the edges of the upper rim of the tray from touching each other and welding together.
4. Carefully and quickly place the tray around your teeth and immediately perform the same procedure you practiced previously, being sure to bite lightly. Be careful not to bite deep into, through, or near the edges of the tray.
5. Keep the tray in position for 30 seconds, then place the tray under cool, running water to set to a firm shape. NOTE: If you feel a tighter fit is needed, the tray can be reheated in hot water and the above steps repeated. If you feel that the tray should be tighter or thinner only over the front teeth, snip the tab from the tray with scissors, hold the tray by its ends and reheat and readapt only the front of the tray
6. If the tray feels too long in the back of your mouth or goes too far under your lips for a comfortable fit, trim off the excess material. Reheat and readapt JUST THAT AREA. If you inadvertently bite through the tray causing a hole, reheat just that area, pinch to seal it and readapt the tray.
7. Once satisfied with the fit of th e tray, cut the tab from the tray with scissors. Make sure the cut is flush with the front surface of the tray. If a rough place remains, hold the tray by the ends and reheat just that area. Then place back in your mouth, bite together and smooth away roughness with your finger. NOTE: The tray will retain its shape by keeping it at room temperature and by protecting it from direct sunlight.
(B) Applying Gel to Mouth Trays
Each 10ml syringe contains 10- 15 treatments, which means you will use 1ml of Teeth Whitening Gel per treatment. Remove the syringe cap, retain for storage and later use. Slowly apply a small amount (about the size of a match head) of the gel into each individual tooth impression in both the upper and lower side of your mouth tray. You should use approximately 1/2 ml of gel for each side, for a total of 1ml per treatment. Carefully insert the now loaded tray into your mouth and gently bite down until your teeth are immersed in the gel.
The Teeth Whitening Gel is a professional grade formulation, so you should immediately feel a tingling or bubbling sensation on the surface of your teeth. This is absolutely normal and lets you know that the formula is doing its job. You should expect to feel this tingling sensation for a significant portion of your treatment.
(C) Activating LED Light Device
After inserting mouth tray, take your blue LED light and place your lips over the clear plastic mouthpiece (or just hold it if you prefer). Turn the light on by pressing the white button. Make sure you press button again to turn off after finishing treatment. Total recommended treatment time is 12-15 minutes.
At the conclusion of your treatment, remove the mouth tray and rinse out your mouth. Rinse mouth tray thoroughly and pat drywith a paper towel. Store in safe place for future use.
(D) Achieving Maximum Results
Immediately follow with another whitening session using the above outlined procedure. Please note that the tingling sensation described above will feel more intense on your 2nd
treatment. Repeat this same procedure three times, either on consecutive days, or when convenient to achieve maximum whitening.
Medical Warnings
1. Consult your dental professional before you use this product if you have had oral or gum surgery in the previous 2 months.
2. Contact your dental professional if excessive bleeding occurs after using this product or bleeding continues to occur after 1 week of use.
3. If you have a pacemaker or other implanted devices contact your physician or the device manufacturer prior to use.
4. Consult your physician prior to using the truewhite advanced plus® if you have medical concerns.
Ingredients:
Teeth Whitening Gel: 12% peppermint hydrogen peroxide gel, hydrogen peroxide 35%, propylene glycol, glycerin, carbomer, peppermint oil, trolamine